Posts Tagged ‘Brier’

The Hardest HVAC Maintenance: A Tip from Monroe

Friday, November 11th, 2011

Do you hate to work on your own mechanical equipment in your Monroe home, like furnaces and plumbing fixtures? You aren’t alone. Many people are not cut out to be do-it-yourselfers (DIYers). They prefer to hand off their maintenance and repair chores to qualified professional. That’s not a bad thing. But there are lots of DIYers who prefer to work on their own home repairs – and those are the people who aren’t afraid to take on the most challenging jobs.

If you are looking for good ideas on how to maintain your home’s heating and cooling (HVAC) system beyond the normal filter changeouts, here are some good things to check – things that will help with the overall performance of your HVAC system.

  1. Check the ventilation system. The ventilation carries conditioned air from a main source throughout your home.  It takes a little time and effort to check your ventilation system for things like cracks or leaks around joints, but it is an important maintenance task. You may even find separations between joints or holes caused by nails. A leaky ventilation system could be sending conditioned air into attics, walls, or crawlspaces and making your furnace work extra hard just to keep your living areas warm and comfortable. Take time to visually inspect as much of your ventilation system as possible – usually metal or flex duct – and repair using joint glue, metal filler, or duct tape.
  2. Inspect the insulation. Your heating system works in conjunction with the insulation in your home to provide comfort and warmth while saving you on high utility bills. A home that is poorly insulated or not insulated at all will cause a furnace to work harder and not only send utility bills higher, but increase the possibility of mechanical failure. Replacing or adding insulation in walls and crawlspaces is a relatively easy, yet time-consuming task. You can roll down or tack up fiber insulation or blow in insulation into walls. You can also seal up cracks on your home’s walls, roof, or foundation with a number of different products. Once again, your goal is to make your heating system work less and save you money.
  3. Check the visible components of the furnace. A build-up of dust and dirt can make the moving components of your furnace work even harder, such as the motors, fan belts, contactors, etc. If you live in an area where there is lots of dust and humidity or if your home has several occupants and/or animals, it is particularly important to check your system on a regular basis. This can be done by removing the access panels and taking a vacuum cleaner hose into as many areas as possible. A good, thorough vacuuming should produce immediate results and make your furnace run much more efficiently.

Try these three steps and you may not have to repeat them for another year or so – possibly not ever again while you live in your home.

Tags: , , , , , ,
Posted in Heating | Comments Off

First Time Homeowners Checklist: A Tip From Brier

Monday, September 26th, 2011

Buying your first home, in Brier or Seattle, is an exciting time. You may feel a rush brought on by the immense independence of owning a home that is all yours. But a home is also an enormous amount of responsibility. As the owner, you are responsible for your own maintenance and repairs, as well as keeping the building up to code.

To make the whole undertaking a little easier, below is a checklist of tasks for the first time homeowner to use as a reference. It is not fully comprehensive, but it is a good start and a solid guideline of responsibilities to keep your home in tip-top shape. It is broken down by frequency of tasks to make it easy to refer to later.

Annually

Make sure you do each of the following every year. For tasks that should be done in the same season, try to combine in the same week or day so that you are on a consistent schedule that is easy to remember.

  • At the start of winter, check the caulking, weather stripping and other sealants around the house. Also check and clear your gutters and downspouts.
  • In spring, check the basement and attic for signs of water leakage or damage.
  • In the summer time, have your home and property checked for termites and other pest infestations.
  • When fall starts, get ready for the heating season by having your heating and ventilation system inspected. Have any repairs or routine maintenance done as needed.

Monthly

To keep your home comfortable and pleasant, there are some tasks that should be performed every month. These are generally simple, but still important.

  • Inspect AC and furnace filters. Clean or replace dirty filters.
  • Test smoke detectors and replace any drained batteries.
  • Vacuum carpets and make sure there is no debris in your furnace room.
  • Pour boiling water or white vinegar in drains to dislodge buildup.

In General

Lastly, there are some things you will want to do as a matter of good practice. Ask around to find good contractors. When you use one you like, keep track of his information in a dedicated file. Be organized. Keeping this checklist handy is a good first step on that front.

Tags: , , , ,
Posted in Air Conditioning, Heating | Comments Off

When to Upgrade Your Circuit Box: A Tip From Granite Falls

Wednesday, September 14th, 2011

How many people in Granite Falls remember what it was like to go on a “fuse search” when a major appliance stopped working? If you lived in or owned an older home, you know what that meant – a blown fuse was a nuisance.

The first types of electricity control were fuses, installed in a main fuse box (or secondary box) which connected the incoming electrical current to separate circuits. Most major appliances like refrigerators and stoves had their own separate current and fuse.

Eventually these fuse boxes were replaced with panels containing circuit breaker panels, which contained circuit breakers instead of fuses. So instead of replacing a fuse when a major appliance or circuit goes down, all that is needed is a flip of the breaker switch back to the “on” position.

Circuit breakers are considered safer and have greater capacity to control current to many of the newer, electricity-consuming appliances such as microwaves and wireless routers, to name a couple. And flipping a switch is much more cost-effective than having to buy replacement fuses, too.

While it is not mandatory for homeowners to replace fuse boxes with circuit breaker panels, it is often a good idea to make the change, especially during a home remodeling project. Doing it “all at once” is a good idea since walls are usually torn up and appliances are being replaced. Before the dust settles on the project, it is logical to install a breaker panel. Better to disrupt everything at once than to go back later and disrupt everything again.

Another reason to install la new circuit breaker panel is because of necessity. Circuit boxes are rated by amperage (amps) – a measure of electrical capacity. For example, older boxes may be rated for 60 amps and newer homes could have boxes rated 200 amps or higher. This bigger demand for power can overload older circuits. And appliances can constantly be popping a circuit or blowing a fuse. In that case, it might be a good time to consider changing to a new circuit breakers panel.

According to www.acmediy.com, there is a checklist of things to consider when installing a circuit breaker panel, including:

  • Determine your load requirements,
  • There may be a need to add new wiring or circuits,
  • Wires coming into your home may have to be upgraded,
  • Old wiring may need to be replaced.

Should you do it yourself? If you have the experience and skill to do so, installing a circuit breaker panel is doable. If not, a qualified, skilled electrician is the person to call. It will cost extra but consider it “peace of mind.”

Tags: , , , , ,
Posted in Electrical | Comments Off

Steps to Take When Your HVAC System Breaks Down: A Guide From Sultan

Friday, September 2nd, 2011

Imagine this – it’s a sweltering summer day in Sultan. The heat outside is obscene, hitting you like a wall when you open the door. So, the only place you want to be is on the couch with the cool air conditioned air being blown across your face. Sounds pretty good doesn’t it? Now, imagine what happens when that cool conditioned air stops flowing.

A breakdown in your HVAC system is the absolute last thing you want to experience on a day where the mercury dings 90+ but it can happen, and the only way to ensure things don’t get out of hand is to take the following steps.

  1. Check Common Problems –While the system itself could be broken, make sure there are no other issues involved. Frequently, the electricity supply can be interrupted by a power surge or a tripped breaker. In both cases, you can usually get the system back online by yourself. However, you should call an electrician to inspect it as soon as possible.
  2. Does it Turn On – If the air conditioning system turns on and simply doesn’t provide enough cooling for your home, it is likely a problem in the unit. In this case, check other common problems. Clogged filters can severely reduce efficiency and if the system freezes over, it may stop providing enough cooling.
  3. Still Not Working? – If the system refuses to turn on and there are not clear problems that you can fix yourself, it’s time to call a professional. A professional HVAC contractor should be available almost any day of the week for emergency calls like this. Of course, in the middle of a heat wave or cold snap, it’s very likely that they may be booked up for a couple days. To avoid this happening, have routine maintenance done as often as recommended to avoid the possibility of being without cooling or heating indefinitely.

A good HVAC system is the only thing standing between you and discomfort, or worse, danger to your health. Don’t let the system go into such disrepair that you can’t use it at all.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

Staying Safe with Clean Indoor Air: A Tip From Brier

Wednesday, August 24th, 2011

Millions of homeowners are living in polluted air and don’t even know it, it can happen even if you live in Brier. In fact, the quality of air inside homes is a significant factor influencing the health and wellbeing of millions annually. The World Health Organization estimates that 1.6 million people die every year as a result of poor indoor air quality. That makes it the 8th most common risk factor for death in the world and a huge contributor to cancers and other respiratory health problems.

So why is indoor air quality such an issue? Consider for a moment what a home does. At its core, a home is designed to keep you and your family protected from outside threats. It does that with solid walls, tightly sealed windows and a well-built roof over your heads. But the same technology that has made homes better sealed than ever also contributes to safety and health problems for residents of those homes by trapping air pollutants inside.

What’s at Stake?

The most common indoor air pollutants are mere irritants. Things like pollen, dust and dander are uncomfortable but don’t necessarily make anyone deathly ill. However, when a home is sealed up too tightly and the air isn’t filtered and cleaned regularly, the result can be downright dangerous to the occupants. Those seemingly innocuous pollutants suddenly make up a much larger percentage of the air inside.

In some cases, according to the WHO, the amount of smoke and other particles inside the home can be up to 100 times higher than what is considered safe outside. Now consider the other pollutants that can be inside the house. If pollen and dander cannot get out, what about exhaust from your stove, radon gas in your basement or mold spores in your ductwork.

You’re breathing all of it and the result is a significant increase in health risks for diseases like pneumonia, respiratory disease, and asthma – all of which are highly dangerous to anyone, but especially children and the elderly.

Solutions Abound

Luckily, this is not a problem you must deal with indefinitely. Modern HVAC systems integrate advanced ventilation technology, air filtration and air cleaning systems to remove the vast majority of these pollutants. But, first, you need to have them installed. Proper testing can help you determine what aspects of your home’s air supply need to be fixed first and foremost. From there it’s just a matter of finding the right contractor.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

How Often Do You Change Your Filters? A Pointer From Mukilteo

Monday, August 15th, 2011

The core component of a good air quality system in your Mukilteo home is your filter. A good air filter removes almost all of the particles that inundate your home every day – from the pet dander that flakes off of your cats or dogs to the pollen released by plants both indoors and out.

But many homeowners are not aware of when they should change the filters in their air quality system. They know it should be done regularly, but how often and when do you ignore the manufacturer’s recommendation to ensure higher quality air?

Know Your Home

The first thing to consider is the size of your home and what types of contaminants you must deal with each day. Air testing helps with this, as does regular cleaning of the areas around your air filter, including your ductwork. If you don’t have any pets and don’t keep any plants inside, your biggest air quality issue is likely dust, and dust will only fill up the filters quickly if you have a large family.

However, if you have a lot of pets, multiple plants and a large family, the odds are that your filter is being put through the ringer every day – asked to filter out a tremendous number of contaminants. This is when you might need to change the filter more often.

Changing Your Filter

If you have a high quality HEPA filter, it’ll probably work for as long as it’s rated. Only lower quality filters or those not large enough for the space in which they are installed will fail early. However, keep in mind that a HEPA filter, even when it can last longer, should always be changed no later than the manufacturer’s recommended date.

For most homes that timeframe is about 6 months. However, some higher quality filters can last as long as 12 or even 18 months in the right conditions. If you use your air filter in conjunction with an air purifier, you should also have the cartridges changed out at the same time as your filter.

If you think you are changing your filters too often, you can always have your air tested to determine if the contaminants in your home require less filtration. Some home have filters larger than they need installed or lower grade filters that get changed too often unnecessarily. As long as your family is safe and healthy, you might as well try to save some money.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off