Posts Tagged ‘Startup’

Seattle Heat Pump Tip: SEER vs. HSPF

Monday, April 2nd, 2012

When it comes buying a new Seattle heat pump, there are two different ratings you’ll often see – the SEER and the HSPF. So, what does each of them mean and which rating is more important when purchasing your new device? Here are a few things to consider:

 SEER

The acronym SEER is short for “seasonal energy efficiency rating” and is used most commonly to measure air conditioner efficiency or in this case, the cooling capacity of your Seattle heat pump.

 HSPF

The HSPF is short for “heating seasonal performance factor” and is a measurement of how efficient the heat pump is in producing heat during the cooler months of the year.

 The Difference Between the Two

Every heat pump will have both of these ratings, allowing you to see how efficient each is. This is important because you need to know for certain how well your heat pump will perform under certain situations – both in the winter and summer.

However, if you live in a colder climate where the summer rarely calls for air conditioner, your focus should be on the HSPF first. And if you live in a warmer climate where your heating needs are minimal, the SEER is most important. Another thing to consider is your supplemental heat. If the cost of your supplemental heating system is high, you’ll want an HSPF that is as low as possible to balance it out.

 Choosing an Efficient Heat Pump

Heat pump efficiency directly impacts the price of the device you purchase but is almost always worth the difference. The key is to find a device that provides what you need based on where you live. Keep in mind as well that, like most HVAC upgrades, you won’t immediately recoup the cost of the device in your energy savings, so if you plan on moving soon, you should purchase a more affordable device now and upgrade later.

Purchasing a heat pump is an important step in making your home more energy efficient. If you are unsure which rating you need or how to analyze their meanings, contact G & S Heating, Cooling & Electric to learn more.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Mountlake Terrace Furnace Repair: Air Flow Problems

Monday, January 2nd, 2012

Whenever you notice furnace air flow problems in your Mountlake Terrace home, you can usually do a little troubleshooting and solve the issue on your own. Most air flow problems can be fixed easily and quickly. Here are a few guidelines to get you started, but if you need help or notice other problems with your furnace, call a qualified G & S heating technician.

Furnace Filters:
Checking the furnace filter is the first step you should take when there are any issues with your furnace, but especially with air flow problems. If a filter is dirty enough, the furnace will not come on at all. Ultimately, a clogged or dirty filter restricts the air flow, and this is the source of air flow problems ninety percent of the time.

Supply Registars and Cold Air Returns:
Once you’ve replaced or cleaned the filter, check your cold air returns, which are the vents that draw in the cold air in forced air systems. When a cold air return is blocked  by furniture or other obstructions, they cannot draw in enough air to allow the furnace to put out an adequate amount of hot air. Make sure they are open if nothing is blocking them.

Next, check your supply registers, which are the vents that supply the warm air, and make sure they are open as well. Whenever your heat is on, all of your supply registers should be open. Closing some vents will not increase the air flow in other vents in the house. Closing off one or two in areas where heat is not always needed will not hurt your system; however, when you close too many supply registers, it can cause problems with the ductwork and eventually damage the furnace if the air pressure is not correct.

Clean Your Vents:
You should have a qualified HVAC technician professionally clean your ducts and vents at least once a year, which is another reason it’s important to schedule annual maintenance visits. A professional cleaning is typically part of the yearly heating system inspection. You can help by vacuuming your vents regularly, particularly during the months the heating system is not in use, or at least before you turn it on in the fall. Simply cleaning your vents can help air flow and extend the life of your entire heating system.

If you continue to experience air flow problems, call a certified heating technician at G & S. There could be a more serious issue, or if you have a newer furnace, your original ductwork could be the wrong size for that furnace model.

Tags: , , , , ,
Posted in Heating | Comments Off

How to Handle Your Finicky Kirkland Heat Pump

Wednesday, December 14th, 2011

A heat pump is designed to keep your Kirkland home comfortable. Warm weather, cold weather – it doesn’t matter. It should turn on when you need it and turn off when you don’t. So, when the device starts turning on and off without reason or when you need it to stay on, what exactly is the problem and how can you fix that problem without losing the heating or cooling capacity of your device.

Common Causes of the Problem

There are a number of reasons why your heat pump would turn off shortly after turning on, and most of the time this occurs in heating mode. If it occurs in cooling mode, you should have the device inspected immediately because there is likely something wrong with a core component like the compressor. For heating mode issues, here are some common problems:

  • Dirty Coils – If the coils are dirty, the device won’t be able to properly operate, especially if it has been some time since the last cleaning. Both sets of coils need to be cleaned at least once a year to avoid this becoming a problem.
  • Low Refrigerant Charge – If the refrigerant gets low, you’ll need to have it recharged because the pressure in the device will drop and it will therefore turn off after a few minutes of use.
  • Defrost Timer – If the defrost timer is forcing the device into a defrost cycle too often (usually it is set to 30, 60, or 90 minutes), the fan might turn off every few minutes after turning on. This is a common problem and is usually due to a thermostat or switch issue which can be fixed relatively easily.

Another thing to ask yourself when this problem occurs is whether the device is heating properly when on. Defrost timer issues don’t usually impinge on the heating ability of the device, while low refrigerant can. You want to make sure the device is working properly when on and not just cycling on and off without heating capacity.

Based on what you find, you’ll need a technician to take a closer look and ensure everything is working properly. Most repairs for this type of problem are relatively simple. If you need any repairs, talk to your local contractor.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

Is My Home as Comfortable as It Could Be? A Question from Startup

Wednesday, November 23rd, 2011

When it comes to your Startup home’s indoor comfort, there are a surprising number of things you need to take into account. Of course, you need to have a good heating and cooling system in place so that you can easily maintain a comfortable indoor temperature all year round. But that really isn’t enough when you’re trying to create the optimal indoor environment. So what else do you need to consider?

Humidity 101

Well, for starters, it’s a good idea to check the humidity levels in your home. Improper humidity can lead to all sorts of problems, and it can also make it harder for your home heating and cooling systems to maintain a comfortable temperature. Air that’s too dry doesn’t hold heat as well as properly humidified air, so in the winter, your heating system will have to work harder to keep your family comfortable. Too little humidity can also dry out your skin and cause the symptoms of colds, allergies and asthma to last longer and be more severe.

On the other hand, if there is too much humidity in your home, you’re more likely to develop problems with mold and dust mites. And your home cooling system will have a harder time keeping you comfortable indoors. Luckily, there are plenty of great humidification and dehumidification systems on the market right now that can take care of all of these types of problems for you, and they’re definitely worth looking into if you’re concerned about the overall comfort level in your home.

Indoor Air Quality

Along these same lines, you should take the time to have your indoor air quality checked by a professional. Indoor air pollutants are a growing problem, particularly in newer homes that are sealed up tight against the elements. These seals prevent all of your temperature conditioned air from escaping and make your home more energy efficient, but they also lead to inadequate ventilation and a buildup of things like gasses, dust mites, bacteria, mold spores and pet dander in your indoor air.

These are obviously not the types of things you want to breathe on a regular basis, so it’s a good idea to invest in ventilation and an indoor air quality system that can bring in a steady supply of fresh air from outside and remove any harmful contaminants from the air circulating through your home.

Tags: , , , , , ,
Posted in Indoor Air Quality | Comments Off

Is Geothermal Energy Renewable? A Question from Startup

Friday, October 14th, 2011

Geothermal heating systems take heat from the ground and transfer it to your Startup home. But how does this heat get into the ground in the first place? Conventional heating systems like furnaces use energy sources like oil or natural gas to generate heat. These energy sources are not renewable, and neither is electricity which is typically generated by burning coal or another non-renewable resource.

The renewable resources we usually think of first are solar and wind power. The sun, of course, will continue to shine and provide heat year in and year out whether we make use of it or not. Similarly, we cannot use up the wind. It will continue to blow no matter how many times it has blown before.

But what category does geothermal energy fit into exactly? Well, it is actually a renewable resource just like solar or wind energy. In fact, geothermal energy is a direct result of the sun’s heat relentlessly pounding the ground. The ground actually absorbs a considerable amount of the heat from the sun that reaches the earth every day, and that is the heat that your geothermal heating system is using to heat your home.

Of course, a geothermal heating system cannot run on geothermal energy alone. The indoor components of this heating system that keep the air flowing throughout your house must be powered by electricity. But the amount of energy needed to do this is much less than what you would need to use to run a furnace or other type of more conventional home heating system.

Over all, geothermal energy is an excellent and renewable source of energy. And once you have the heating system in place, you will need to spend very little to keep it up and running. It is an excellent option for many people, and can help to keep your home cool in the summer as well.

Tags: , , , , ,
Posted in Geothermal | Comments Off

Maintenance Really Does Save Money: Some Pointers From Startup

Friday, September 16th, 2011

When it comes to your Startup home heating and cooling systems, you really cannot go wrong with proper annual maintenance. While it may seem like an unnecessary expense, especially if your systems are relatively new, you will save a lot in the long run if you pay that small fee once a year for each system.

During a maintenance visit, a technician can thoroughly clean out your heating or cooling system and check all parts to make sure they are not showing signs of excessive wear and tear. If they do find a problem or a part that needs to be replaced, they will be able to make the necessary repairs quickly and you will not have to worry about calling someone out later for an emergency visit.

Also, catching problems early like this means that repairs will likely involve fewer parts and cost much less than they would if you let the problem go and it became more widespread. The truth is that your heating or cooling system can continue to work when one or another of its parts is not working correctly, but that means that other parts of the system have to work overtime to create the same result.

Your heating or cooling system will also be much more energy efficient if it receives regular tune ups and attention from a professional. Even the best new systems lose a small percentage of their efficiency each year that they are in operation. While this is not much from year to year, the cumulative effect will soon cause your energy bills to climb higher than necessary.

Paying for regular maintenance, then, can actually save you money because it will mean you pay less each month to run your system. And it is never too late to start. Even if your heating or cooling system is not new, it will benefit from a thorough cleaning and tune up. You may be quite surprised how much your energy bills go down after this type of service has been performed.

Annual maintenance can also help you to get more for your money by extending the useful life of the heating or cooling system. Many systems that are properly maintained can last even beyond their expected life span, meaning that you will not have to replace it as soon as you would have otherwise. For all of these reasons, the minimal cost of an annual maintenance visit is well worth paying over the long term.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

Does Humid Air Affect How AC Runs? A Question From Marysville

Friday, September 9th, 2011

You’ve probably heard a dozen times in Marysville that humidity is removed by air conditioning. Unfortunately, the common assumption is that there is no inherent cost in allowing humidity to persist in their home. But, did you know it costs significantly more to remove humidity from the air with air conditioning than with a dehumidifier? Here’s why.

Water Vapor in Your Air Conditioner

Consider the amount of energy it takes to raise the temperature of water by one degree – one BTU. However, to change water from liquid to steam, another 10 BTUs are required. So, imagine how much energy it takes to condense water vapor from the air (in the form of humidity) into a liquid. This is what your air conditioner does whenever it processes humid air. It takes about 1,050 BTUs to condense one pound of moisture in the air into liquid.

The cost of running your air conditioner strictly for dehumidification can be huge, especially considering the fact that humidity is heaviest in the morning and evening when you probably don’t need your air conditioner every day (at least not early and late in the summer). Imagine, the cost difference if you used a dehumidifier to remove 150 or more pounds of moisture per week and an air conditioner when needed just to remove 15-20.

Negative Impact on How it Runs

Another thing to consider is that humidity can actually put an extra burden on your air conditioner. While the system is designed to remove that liquid from the air and get rid of it through the cooling coil and condensate drain, every extra minute the system is running is a bigger burden on it. Of course it will do its job for a few years, but the extra running time will add up, not only on your electricity bill but eventually on the machine itself.

The added pressure will result in eventual breakdown of the system and a need for early replacement. The easiest solution is to purchase a dehumidifier. These run at a fraction of the energy level of a full AC system and work extremely well to remove humidity from your home. In fact, most air conditioners will only remove humidity after 20-30 minutes of continuous operation. For short cooling cycles, you may not even dehumidify the house. So a dehumidifier ensures higher levels of comfort all at a lower cost.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

How Often Do You Change Your Filters? A Pointer From Mukilteo

Monday, August 15th, 2011

The core component of a good air quality system in your Mukilteo home is your filter. A good air filter removes almost all of the particles that inundate your home every day – from the pet dander that flakes off of your cats or dogs to the pollen released by plants both indoors and out.

But many homeowners are not aware of when they should change the filters in their air quality system. They know it should be done regularly, but how often and when do you ignore the manufacturer’s recommendation to ensure higher quality air?

Know Your Home

The first thing to consider is the size of your home and what types of contaminants you must deal with each day. Air testing helps with this, as does regular cleaning of the areas around your air filter, including your ductwork. If you don’t have any pets and don’t keep any plants inside, your biggest air quality issue is likely dust, and dust will only fill up the filters quickly if you have a large family.

However, if you have a lot of pets, multiple plants and a large family, the odds are that your filter is being put through the ringer every day – asked to filter out a tremendous number of contaminants. This is when you might need to change the filter more often.

Changing Your Filter

If you have a high quality HEPA filter, it’ll probably work for as long as it’s rated. Only lower quality filters or those not large enough for the space in which they are installed will fail early. However, keep in mind that a HEPA filter, even when it can last longer, should always be changed no later than the manufacturer’s recommended date.

For most homes that timeframe is about 6 months. However, some higher quality filters can last as long as 12 or even 18 months in the right conditions. If you use your air filter in conjunction with an air purifier, you should also have the cartridges changed out at the same time as your filter.

If you think you are changing your filters too often, you can always have your air tested to determine if the contaminants in your home require less filtration. Some home have filters larger than they need installed or lower grade filters that get changed too often unnecessarily. As long as your family is safe and healthy, you might as well try to save some money.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

Mold…What if I Have Mold?

Monday, July 25th, 2011

No one wants to find mold. But, even if you’re not aware of it, mold is probably lurking somewhere in the damp, dark crevices of your home. And mold is particularly likely to grow in homes with improperly regulated humidity. Luckily, because we know that, there are quite a few things we can do to stop the growth of mold in its tracks and save your home from unsafe air quality and the damaging effects of those little spores.

The Dangers of Mold

As mold grows, it can do damage to your woodwork and other areas of your home. It also contributes to indoor air quality issues because mold spores are a significant indoor air contaminant. Many people are allergic to mold spores, so if you or someone else in your household has experienced allergy symptoms that you can’t explain, mold spores are a likely culprit.

If you find out there is mold in your home, don’t panic just yet. There are some things you can do to address the problem and get mold out of your house for good. Your main task will be getting rid of the mold that is already there. This isn’t necessarily easy because of the areas mold tends to grow in. But, even with the proper air quality treatment, your home and health is still at risk if you don’t target that existing mold fast.

Stopping Mold in Its Tracks

Just getting rid of existing mold won’t solve the problem, though. Mold keeps coming back as long as there is an environment to support it – and that means moisture. Mold requires water to grow, so the chances are that if you have a mold problem in your home, you also have a humidity problem. Getting your indoor humidity under control will make it much easier to remove and keep mold out of your home for good.

There are plenty of good humidification systems on the market today. They can be easily integrated into your home heating and cooling system and provide great, consistent humidity control. Make sure you get one that’s large enough for your home. An indoor air quality professional can help you make that determination. Once you have a good humidification system in place, you’ll notice a huge difference in your overall indoor air quality, and hopefully the problem won’t return anytime soon.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

What is a Whole House Fan?

Wednesday, July 20th, 2011

Cooling your home is a big deal. Especially if the temperature in your home is generally very high in the summer, the cost of air conditioning is tremendous. A central air conditioner can cost between $2,000 and $4,000 to run for an average 2,800 square foot home over the course of six months. That’s a lot of electricity just to stay cool.

That’s why a whole house fan is a great option for those that want to forego the use of direct air conditioning for at least part of the year.

What It Does

A whole house fan is different from a standard air conditioner because it doesn’t use a heat exchanger to remove heat from air before it enters your home. That heat exchanger is the culprit for a large percentage of an air conditioner’s energy consumption. A whole house fan can be used when the temperature outside is lower than inside, a common occurrence on moderate days in the summer.

The whole house fan draws air and then cycles it through your air vents without cooling it. The act of moving air through your home, however, is often enough to cool the space to a comfortable level. The size of your whole house fan depends on quite a few things. First, how big is your home? Large homes that require even cooling need a larger fan to draw in air. However, small homes can often get away with models that use as little as 120 Watts of electricity. That’s less than your computer uses.

Choosing a Fan for Your Home

Keep in mind that a whole house fan only works when the temperature outside is lower than inside. If the air outside is excessively humid or if it is very warm in the hottest months of summer, you will still need an air conditioning unit. But, even if you run your air conditioner for two months out of the year, you’ll save a tremendous amount of money in the other four months by operating a whole house fan.

Whole house fans should be used in conjunction with an effective air purification system to ensure all outdoor contaminants are effectively removed before they are cycled through your house. They also require the same level of maintenance and cleaning as a normal AC system. However, with the right care, they work wonders to cut down on your energy bill.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off