GeothermalDo Geothermal Heating and Cooling Systems Require Maintenance?

When it comes to efficiency and reliability when heating and cooling a home in a very convenient manner, geothermal heating and cooling systems are pretty tough to beat. Such systems utilize heat pump technology in order to remove heat from a home during the summer months, dumping it into the ground, while using heat in the earth on the property in order to heat it during the winter. In addition to the efficiency and convenience that comes with heating and cooling a home with one such system, though, is the great reliability that geothermal heat pumps have to offer. If you really want to get the most dependable performance that your system has to offer, of course, G&S Heating, Cooling & Electrical, Inc. is here to tell you that geothermal maintenance in Kenmore is a must.

In some ways, a geothermal heating and cooling system is one of the most reliable available. A major component of this, the geothermal loop, is nevertheless quite a simple component. It is buried on your property, and that is all you really need to worry about. There aren’t moving parts or electronic controls down there to worry about. However, this geothermal loop system is only a part of a whole. A geothermal heat pump is also used in order to facilitate the transfer of heat from the ground to your home and back again. Along with the ductwork, thermostat controls, and other components above ground, the geothermal heat pump is going to require regular maintenance in order to function reliably, and at peak efficiency and performance levels.

A number of important assessments are made during a geothermal maintenance service. First of all, refrigerant levels will be checked to ensure the proper charge. Refrigerant is constantly recycled, not used up as a fuel is, so there should be no fluctuation in the amount within your system. Electrical components will be tested and cleaned, system pressure measured, and more. In short, geothermal maintenance gives a trained professional the opportunity to look over your system as a whole, clean it and tune it up as needed, and to diagnose minor and developing problems before they can cause any real headaches.

Just make sure that you schedule this vital service with a trained professional that you can trust. To do so, just call upon the technicians here at G&S Heating, Cooling & Electrical, Inc.

In terms of keeping your geothermal heating and cooling system in great working order, nothing can contend with routine geothermal maintenance in Kenmore.



Our Office

Office: M-F 8am - 5pm
Services: 24/7
3409 Everett Ave,
Everett, WA 98201
1404 Riverside Drive, Suite G
Mount Vernon, WA 98273

Follow Us!

Site Map | Privacy Info | © G&S Heating. All rights reserved