If your Green Lake home is cold, many blame the furnace for not bringing up the warm temperatures or they blame the thermostat for not working right.
It may very well be a thermostat issue – often caused by the location of the thermostat – that is causing the problem. However, sometimes root cause is found in the furnace or ventilation system.
Your indoor environment may be contributing to a seemingly slow-moving furnace. Your furnace may be working too hard to keep up with the heat demand because of an excessive build-up of dirt or debris on the filter or around the moving parts, such as the motor or fan belt. The most obvious thing to do is to keep the airflow unobstructed and keep all working parts clean.
First of all, you should regularly check your furnace filters and if they are dirty, replace them or clean them. Disposable furnace filters are relatively inexpensive and come in a variety of sizes and media ratings (ratings determine what size media is used and its ability to trap certain sized particulate). You can buy these individually or in bulk from a number of different resources. It is a good idea to replace the filters every three-six months.
Mesh filters can be removed, cleaned and reinserted. Like replaceable filters, mesh filters should be checked on a regular basis and then cleaned at least every three months.
You can remove the access panels to your furnace and inspect the components for any build-up of dust, dirt, or debris. Using a vacuum with an extension hose usually is all it takes to clean up the area.
Other reasons for poor heating performance include dirty or blocked ductwork. The harder your furnace has to work to push air through the ventilation system, the longer it takes to bring the heat up. Make your furnace work less and keep vents clear and ductwork clean.
Finally, the reason your furnace isn’t producing enough heat may not be the fault of your furnace at all – you may have a leaky house. But that’s a whole different story.