By now you’ve probably heard how important it is to have good ventilation in your Mercer Island home. Especially if your home was built in the 1980s or early 1990s when ventilation issues were prevalent, you may not have enough clean air moving through your home. But, how much ventilation do you need? What is enough and if you don’t have it, how do you ensure your home is retrofitted properly?
How Much Ventilation?
Most recommendations for ventilation come from the Home Ventilation Institute, which provides a series of standards of measurement for builders and contractors retrofitting homes for better ventilation. Here are some of their recommendations and how they might apply for your home:
- Bathroom – Small bathrooms (less than 100 sq. ft) need 1 CFM per square foot of bathroom. The number goes up for each fixture if you have a large bathroom.
- Kitchens – Your kitchen range needs at least 100 CFM if against the wall and upwards of 150 CFM if on an island.
- Ventilators – If you have an HRV for your home, you should have at least 100 CFM for 2,000 square feet and another 50 for every 1,000 square feet of home size being ventilated.
- Home Ventilators – The actual volume of CFM for ventilators depends on the type of ventilator being used. For example, a whole house ventilator needs upwards of 6,000 CFM for a 2,000 square foot home. Attic ventilators need 1,400 or more.
So, what does this mean for your home? It means in general that you need a lot of ventilation and that the best way to get it is through mechanical ventilation techniques combined with your air handler and ductwork.
Especially if you recently added insulation and weather proofing to your home but have not yet updated your ventilation, you might have a major air quality problem, so have a professional measure your home’s air flow as soon as possible.